GV-IP Decoder Box


    • Decode video streams in H.264 codec at a maximum frame rate of the IP device
    • Decode up to 5 megapixel IP cameras
    • Decode up to 64 IP streams
    • Support for third-party IP cameras that adhere to RTSP, ONVIF or PSIA
    • Support for display of Matrix view through GV-Mobile Server
    • Support for 10/100 Ethernet over LAN
    • Support for Wi-Fi
    • Support for single and sequential display
    • VGA and HDMI Video outputs
    • Video output resolution up to 1080p
    • Support for GV-Joystick control of GeoVision and third-party PT, PTZ and Speed Dome cameras
    • Support for remote firmware upgrade, IP address configuration and addition of new channel
    • IR remote control
    • SD/SDHC card and USB drive for snapshot storage and firmware upgrade

* No SD/SDHC card slot & local storage function for Argentina

  • Compatible Devices
  • Specifications
  • Dimensions
  • Mount
  • Accessories
  • Packing List

The GV-IP Decoder Box is compatible with:
1. Most GeoVision IP devices (of the indicated firmware versions) using H.264 codec
2. GV-SD200 using H.264 codec through ONVIF
3. Third-party IP devices that support H.264 and adhere to RTSP, ONVIF or PSIA.

Supported GeoVision IP Devices
Device Type Models Firmware Versions
Box Camera GV-BX110D V1.08 or later
All models
(except GV-BX110D)
V1.06 or later
Bullet Camera GV-BL110D V1.08 or later
All models
(except GV-BL110D)
V1.06 or later
Cube Camera
Fixed Dome
Vandal Proof IP Dome
All models V1.06 or later
Mini Fixed Dome GV-MFD110 V1.08 or later
All models
(except GV-MFD110)
V1.06 or later
PT Camera
PTZ Camera
V1.02 or later
V1.0 or later
Speed Dome GV-SD010
V1.02 or later
V1.0 or later
Video Server GV-VS04H V1.04 or later
Video Server GV-VS11 V1.0 or later
Video Server GV-VS12 V1.05 or later
Compact DVR GV-Compact DVR V3 series only V1.0 or later
IMPORTANT: The connected GeoVision and third-party channels must be set with H.264 codec to be compatible.


To decode and display non-H.264 IP channels or analog channels, connect the devices to GV-System and access them through GV-Mobile Server. The supported devices are listed below.

Supported Devices Connected to GV-System
Analog cameras
All models of GeoVision IP cameras, GV-Video Server, GV-Compact DVR, GV-IP Speed Dome, GV-Smart Box and GV-DSP LPR
11 brands of third-party IP cameras. For detail, see

Video Codec H.264
Video Output at 60 Hz HDMI VGA
480p 640 x 480
720p 1024 x 768
1080i 1280 x 768
1080p 1366 x 768
Interface 10/100 Ethernet
IR Remote Control Yes
Connectors Power 12V DC Jack
Ethernet RJ-45
Monitor Output HDMI, VGA
Local Storage & Firmware USB slot (2.0 backward compatible, FAT32 format)
Upgrade SD/SDHC card slot (for Class 6 or above, FAT32 format)
Operating Temperature 0 °C ~ 40 °C (32 °F ~ 104 °F)
Operating Humidity 20 % ~ 80 %
Dimensions (W x H x D) 182.5 × 29 × 141.5 mm (7.19 × 1.14 × 5.58")
Net Weight 615 g (1.36 lb)
Power DC 12 V
Power Consumption 36 W (max. 3 A at 12V DC)
Regulatory CE, FCC compliant
Language English

Name Details

Wall Mount Kit
The Wall Mount Kit is used to mount the GV-IP Decoder Box to the wall.

VESA Monitor Mount Kit
The VESA Monitor Mount Kit is used to mount the GV-IP Decoder Box to the back of a VESA monitor.

The GV-Joystick facilitates focusing, zooming, panning, tilting of GeoVision and third-party PT, PTZ and Speed Dome cameras on GV-IP Decoder Box.
GV-WiFi USB Adapter The GV-WiFi USB adapter is a plug-and-play device that provides wireless connectivity to GeoVision IP devices. The GV-WiFi USB Adapter complies with IEEE802.11 b/g/n (Draft 3.0) standards for wireless networking.

  • GV-IP Decoder Box × 1
  • IR remote control × 1
  • AC/DC adapter × 1 (12 V, 3 A, 36 W)
  • Power cord x 1
  • GV-IP Decoder Box and GV-Pad Software DVD x 1
  • GV-IP Decoder Box and GV-Pad Quick Start Guide x 1

Note: Specifications are subject to change without notice.

Copyringht © 2020 Lagi CCTV. All rights reserved.